Skip to content
Swimming Pool Tips and Tricks

Top Ten Swimming Pool Tips And Tricks

Swimming pool
swimming pool

1. Maintaining pH levels: One of the most important aspects of pool care is maintaining pH levels. The ideal pH level for a swimming pool is between 7.2 and 7.6. pH levels that are too high or too low can cause skin and eye irritation, and can also damage pool equipment.

2. Algae control: Algae can be a big problem in swimming pools, and it can be tough to get rid of once it takes hold. Regular cleaning and proper chemical balance will help to prevent algae growth, and there are also special algaecides that can be used to kill algae.

3. Shock treatments: Shock treatments are a great way to keep your pool clean and clear. They are used to kill bacteria and other contaminants, and can also help to remove stains. Shock treatments should be done on a regular basis, and the type of shock treatment used will depend on the type of pool you have.

4. Skimmer baskets: Skimmer baskets collect debris that falls into the pool, and they should be cleaned out on a regular basis. If the basket is not cleaned out, it can cause the pump to work harder than it needs to, which can lead to premature wear and tear.

5. Backwashing: Backwashing is a process of reverse filtration that is used to clean out the filter. It is important to backwash on a regular basis, as it will help to extend the life of the filter.

6. Vacuuming: Vacuuming is a great way to remove dirt and debris from the bottom of the pool. It is important to vacuum on a regular basis, as it will help to prevent the build-up of dirt and debris.

7. Cleaning the deck: The deck around the pool should be cleaned on a regular basis, as it can become stained and slippery. A power washer can be used to clean the deck, and there are also special cleaners that can be used to remove stains.

8. Testing the water: Water should be tested on a regular basis to ensure that pH levels are where they should be. Test kits are available at most pool supply stores, and it is important to follow the directions carefully.

9. Adding chemicals: Chemicals should be added to the pool on a regular basis to maintain pH levels and to kill bacteria. It is important to add chemicals in the proper amounts, as too much or too little can cause problems.

10. Winterizing: Winterizing is a process of preparing the pool for winter. This includes removing all of the water from the pool, as well as adding antifreeze to the plumbing lines. Winterizing should be done by a professional, as it can be difficult to do properly.

If you don’t want to take care of all these things yourself then contact companies such as Rankroo and have them find the workers for you. You can then simply sit back and enjoy your pool.

…
May 21, 2022 / Comments Off on Top Ten Swimming Pool Tips And Tricks
read more

Brisbane pool filters

Swimming pool

Top Factors To Consider When Buying A Pool Filter

A pool filter is an essential part of your swimming well-being. This is because it’s responsible for cleaning the water and keeping it in safe conditions. That’s why you should pay close attention to the pool filter you choose. When the filter is not functioning well, it might affect other pool components. It might overwhelm the pump. But even worse, the water will be contaminated and risk your well-being.

In this article, we’ll share with you the top factors to consider when buying Brisbane pool filters.

  1. Pool Size

The first thing to consider is the amount of water you want to filter. The pool volume will determine this. When you check different filters, you’ll realize they have volume ratings. This is to ensure you pick the right filter that won’t be overwhelmed by your filter size.

If you don’t know the volume of your pool, measure its depth, width, and length in meters. Multiply the measurement. You will get cubic meters directly translated into the total volume in liters. You can also ask your contractor to help you decide and choose the volume of your pool.

  • Pool Type

Do you have an infinity pool or in-ground filter? This is a critical question that you must ask yourself. This is because different filters will work perfectly on different types of pools. An above-ground filter should be relatively smaller as compared to an in-ground pool of the same size. So, as you think about the pool size, consider the type of the pool and choose the filter that would serve you better.

  • Pump Compatibility

The pool filtration system is connected to the pool pump. This is because the pump pushes the water from the pool into the filter and then takes it back into the pool. So, to get the filter to perform well, it should have a compatible capacity with the pump.

Consider factors such as the flow rate of the filter. It’s basically the amount of water that needs to pass through the filter per hour. The flow rate the filter can handle should be similar to the flow rate the pump supplies to the filter. If the pump has a higher flow rate, it will end up overwhelming the filter, eventually leading to its failure.

  • Budget

Brisbane pool filters come at different prices. Consider the cost of buying and maintaining the filter. Think long term and buy what will suit your budget. It’s advisable to buy a quality filter that doesn’t cost a lot of money in maintenance or replacement. So, don’t just think of the price. Factor all the costs that could be involved with the filter. When the pool filter is not selected correctly then the cost of running the filtration system can increase too. and with the state of energy pricing around the world (see this article: https://www.thetimes.co.uk/article/soaring-energy-costs-force-french-swimming-pools-to-close-r0c8lrk5g) this is not what anyone wants.

Parting Shot

When you have the best Brisbane pool filters, you can be sure your pool will be safe. This is because your water will be cleaned and stays safe for everyone using it. So, consider all the above factors and choose the filter that suits you.

Back to the top
…
October 11, 2022 / Comments Off on Brisbane pool filters
read more

How to Maintain Your Pool Pump in Brisbane

Swimming pool

What does your pool pump do

A swimming pool pump is an essential equipment for efficiently filtering and circulating pool water, leaving you with clean, debris-free, and safe water for your relaxation. When in operation, the pool pump runs continuously, creating the flow of water that circulates the pool water to the filter, heater, and salt chlorinator. Without it, the water wouldn’t be effectively sanitized, leaving you with dirt ridden water that’s contaminated with bacteria. Therefore, the importance of a pool pump cannot be overstated.

Regardless of whether your pool is big or small you will need a pool pump to ensure the water is in the best condition for swimming. Even these pools have pool pumps https://www.travelawaits.com/2667194/the-worlds-largest-swimming-pools/, although most likely a lot larger then the average family home swimming pool.

That said, it’s important to note that your Brisbane pool pump, just like every other mechanical device, requires regular maintenance for it to keep working efficiently. Without a well-functioning pump, maintaining your pool becomes a difficult task. Here are 4 tips on how to maintain your pump and keep it in prime condition.

Perform Regular Checks

As mentioned, your pool is the powerhouse of the entire swimming pool, which means you need to run it every day to keep your pool clean and safe. How long you should to run your pump each day will depend on various factors including the quantity of water your pool holds and the turnover rate. On average your pump should run about eight hours a day. And this means you have to check it on a weekly basis to see if there’s a problem that needs to be addressed.

Some of the parameters to focus on during your routine checks include the water flow, motor temperature, current and voltage, filter’s pressure reading, and running time. Compare these readings with what’s indicated in the owner’s manual. Also, check for damaged seals, unusual vibrations and sounds, and leaks.

The idea is to identify any issues early and prevent costly repairs down the road. Once you suspect any abnormality, contact a Brisbane pool pump repair service technician to fix it.

Clean the Skimmer and Pump Basket

A swimming pool uses a skimmer basket and pump basket to capture larger debris such as sticks and leaves. By trapping these contaminants, these two baskets protect the impeller and filtration system from damage. Over time, debris accumulates in these baskets and, if not removed, they can become clogged, thereby stressing the seals in your Brisbane pool pump.

Clogged baskets also prevent the pump from functioning optimally and you may not get the proper turnover rate for proper filtration. It’s, therefore, important that you clean both the skimmer and pump baskets every week to remove the captured debris.

Ensure Proper Pool Water Level

You probably already know that ensuring proper pool water level is crucial to increasing your swimming pool’s longevity. Not paying attention to your pool water level can have serious implications to your pump and other pool components. The good thing is that you can avoid any damage to your Brisbane pool pump by checking your water levels at least once a week.

Ideally, your pool’s water level should be anywhere between one-third and one-half up your skimmer plate. Remember, your pump and the skimmer in your pool are usually connected by a hose. This means, if your water levels are too low, the pump is likely to suck air rather than water. This can cause serious damage to the pump. High water levels, on the other hand, may leave the debris floating on your pool since it can’t be pulled into the skimmer box. So, be on the look out, and always adjust the water levels as needed.

Clean Your Pool Filters

Your pool’s filter, just like your home’s air filter, requires regular cleaning to remove the dirt, debris, and contaminants it captures and ensure it runs efficiently. When the pool filter becomes clogged with debris, the flow of water through the filter is hindered and the pressure increases. This means the pump has to work harder to circulate the pool water, shortening its life.

So, whether you’re using a sand filter, diatomaceous earth (D.E) filter, or a cartridge filter, be sure to clean your pool filter as soon as the water starts turning cloudy or the pressure gauge starts reading 10 psi above the normal. A clean filter means a clean pool. So, make sure you clean your filter at least once a month. Working with a Brisbane pool pump service is always the best option when it comes to pool equipment cleaning and maintenance.  

…

September 6, 2022 / Comments Off on How to Maintain Your Pool Pump in Brisbane
read more

How to Tell Your Pool Pump Needs Repairs or Replacement

Swimming pool

You probably already know the important role the pump plays in ensuring a high-quality water circulation in your swimming pool. Think of the pool pump as the heart of your pool’s circulatory system. That means, without it or it’s optimal functioning, your entire swimming pool system suffers— and quickly transforms into what looks like a black lagoon. At the end of the day, you and your loved ones wouldn’t have a clean and safe pool to relax your minds and body in, alleviate stress, and cool down on a hot day.

Simply put, the operation of the pump dictates the entire functioning of the entire swimming pool system. As such, it’s important that you keep your pool pump in optimal working condition. And this includes knowing when it’s time for pool pump repairs. That said, here are five telltale signs that your pump needs to be repaired.

The Pool Pump is Noisy

Pool with a working pump

As with other mechanical equipment, pool pumps have components that are prone to damage as a result of shock, clogging, overheating, vibrations, and corrosion. Ideally, your pool pump is designed to run quietly without any unpleasant or strange noises. Therefore, if you notice any loud grinding or screeching noises from your pump, chances are the bearings are defective or stuck and need replacement or lubrication. Unusual vibrations from the motor may be a sign that your pump is dislodged and it’s time to get a pool pump repairs professional to take a look.

The bottom line is that you need to watch out for any out-of-character noises and contact a pool pump repair service immediately to identify the source of the problem.

The Pump Suddenly Stops Working On its Own

Unless there’s a power outage in your neighborhood or area, your pump should be running smoothly without any issues. However, if your pump motor keeps shutting off on its own, chances are certain parts of the pump could be overworking. It could also be an overheating problem as a result of a clog or damaged fan. This is a sure sign that you may need pool pump repairs service for a proper diagnosis of the problem before the pump breaks down entirely.

The Pump Trips Your Power Breaker

It’s not uncommon for pool pumps to trip out the power or cause a power surge. Often, when this happens, it could be a short-circuiting problem caused by condensation or water entry in the motor. The electrical failure could also be an indication that your pump motor is on its last legs. The best course of action is to have a reputable pool pump repair service expert inspect your pump to identify and fix the source of the problem. In most cases, the cost of repairing a serious pump electrical issue equals that of getting a new pump.

Brisbane pool pump repairs underway

The Pump is Getting Old

All mechanical tools and equipment have a shelf life, and your pool pump is no different. Ideally, if well maintained, your pump should serve you well between 8 and 12 years before needing replacement. However, it’s worth mentioning that the older your pump gets, the more care and maintenance it will require. If your pump is older than 12 years— and frequently breaks down— it’s best to get a newer, modern pool pump. Be sure to ask your pool pump repairs technician for advice as to whether or not to replace your pump.

Poor Water Quality

For you and your loved ones to enjoy the benefits of a swimming pool, it must have clean and safe water. And, as mentioned, the pool pump plays a critical role in ensuring the water quality in your pool is as required for swimming. Now, if you’ve been cleaning your pool properly, correctly balancing the chemical levels, and doing everything else by the book yet the water quality doesn’t seem to improve, chances are there’s a problem with your pump. And it may be time for a Brisbane pool pump repairs expert to take a look at all your pump. For example try a search in the yellow pages to find someone to look at your pump.…

August 9, 2022 / Comments Off on How to Tell Your Pool Pump Needs Repairs or Replacement
read more

Electrified only by renewable energy? Burgenland in Austria shows how it’s done!

Swimming pool

With electricity being one of the biggest costs of owning and maintaining a swimming pool, perhaps we need to take a leaf out of Burgenland’s play book.

A federal state in eastern Austria has become a role model for Europe and possibly the rest of the word: Burgenland covers its entire electricity demand by using renewable energy sources. Furthermore, it produces so much electricity to provide other regions with it. This could be done all over Europe. It only takes political willpower.

At first sight, the narrow strip of countryside in the east of Austria, Burgenland, has little in common with Iceland. Flat plains here – rugged cliffs there. The quiet Lake Neusiedl in Burgenland – steaming geysers on the small island in the North of Europe. Vineyards here – moss landscapes there. But as different as the regions may be, both manage to make the most of their geographical advantages and generate energy from it. While Iceland mainly uses geothermal sources, Burgenland relies on wind power.

Burgenland and Iceland demonstrate: Europe could end the exploitation of fossil and nuclear sources. This is also confirmed by a study of the Institute for Transformative Sustainability Research (IASS). All that is necessary is for each region to recognise and utilise its individual potential to generate electricity.

No coal, no oil, no nuclear power: Europe could become 100 percent self-sufficient

The IASS examined that Europe could generate 14,560.4 terawatt hours (TWh) of electricity from renewable energy sources. This compares to a total consumption of 3,204.2 TWh. In other words: Europe could satisfy its demands 4.5 times over – only from renewable sources. To illustrate this, the IASS has created an interactive map that visualises the energy demand in each region and how much electricity could be generated from renewable energy sources.

Regions that can easily cover their needs are green. Areas where it is difficult to do so, are red. What stands out: Apart from the large metropolitan areas such as Vienna, Prague, Brussels, Budapest or Berlin, the all regions in Europe are green. But even those frew red spots could be supplied by surrounding regions.

Due to the variety of landscapes and climates in Europe, production shortages could easily be avoided. If there’s no wind in Burgenland, the missing electricity could be generated by solar power plants in Italy and vice versa. This is also underlined by Tim Tröndle from the IASS:

“A SELF-SUFFICIENT EUROPE, COMPLETELY BASED ON RENEWABLE ENERGY, IS POSSIBLE. ESPECIALLY IF TRADE IS ESTABLISHED BETWEEN REGIONS AND COUNTRIES.”

Renewable energy: Burgenland keeps its promises

renewable energy austria burgenland
Socialdemocratic governor of Burgenland Hans-Peter Doskozil (Photo © Parlamentsdirektion / Michael Buchner)

However, many European regions don’t use their potential. Politicians are afraid to break with the coal industry. In Burgenland, the situation is different: In 2006, the local parliament decided that the federal state has to meet its entire electricity demand by using renewable energy sources until 2013. Not only did Burgenland keep this promise, it even went further: It now covers 150 per cent of its electricity demand by renewable energy sources and can thus supply other regions with electricity.

In comparison: In 2000, the share of renewable energy sources was only 3 percent.

419 million euros for green electricity to combat climate change

Burgenland is not yet satisfied and plans to invest more in wind power. By 2025, the federal state will put 419 million euros into this project. This will increase wind-based electricity by 25 percent, but also expand network capacity and multiply electricity production from photovoltaics by 10 per cent. In this way, solar energy will become the second pillar of Burgenland’s energy strategy. In addition to that, the money will be used to finance the ecologisation of public transport.

29 hydrogen busses for Burgenland

In another project, Burgenland plans to integrate hydrogen-powered busses in the federal state’s transport network. Additionally, the hydrogen needed for this will be generated in Burgenland. Energie Burgenland boss Michael Gerbavsits explains:

“ENERGIE BURGENLAND* WILL BUILD THE ELECTROLYSIS UNITS FOR THIS PROJECT AND THUS PRODUCE THE HYDROGEN NEEDED TO OPERATE THE BUSSES.”

(*the state owned energy company, editors note)

Organic will become standard – one third of the region’s area under nature conservation

renewable energy austria burgenland
Burgenland will expand organic farming as well.

Burgenland is a role model when it comes to climate-neutral electricity generation, but it also focusses on climate protection: More than a third of its surface is under nature conservation and the agricultural sector relies on organic farming.

For the provincial government of Hans-Peter Doskozil (Social Democratic Party), organic products shall become standard. Therefore, he has come up with an ambitious 12-point-plan. For example, permits for new stables will only be granted if they are certified as organic. Nevertheless, the federal state is also aware of its responsibility as a major consumer and wants to gradually increase the amount of organic products in state and state-near kitchens and buffets: In 2021, 50 percent of meals will be organic and in 2024, 100 percent. The same will be implemented in nursery schools.

Image what it would be like back home here in Australia if we could convert our towns and cities to 100% renewable energy. Keeping our pools clean would certainly be a lot more cost effective. It may even be possible to keep them heated over the cooler winter months if the power used was 100% renewable. Who do we need to drive in the Australian government to cause this to happen for us?… just some food for thought.…

August 4, 2022 / Comments Off on Electrified only by renewable energy? Burgenland in Austria shows how it’s done!
read more
Royal Elementor Kit Theme by WP Royal.

Privacy Policy - Terms and Conditions